How it started: a spreadsheet I didn't ask for
In February 2024, my ops director walked over to my desk and dropped a printout next to my coffee. Twelve line items. Everything from wear parts for our excavator fleet to a bidet attachment for the second-floor office restroom. Realistically, I was looking at three completely different vendor categories, and I had maybe four business days.
For context: I'm the office administrator at an 85-person civil contracting company. I handle roughly $160K in annual purchasing across nine vendors. When I took over purchasing in 2020, my whole process was a spreadsheet, three ring binders of old POs, and a lot of guessing. It worked, sort of. But in 2023 we started moving things online, and the difference in what I could actually get done in a week is the reason I'm writing this.
The line items looked like this: esco bucket teeth for two excavators, something about generator installation at a temporary site trailer, a bidet attachment that facilities wanted for the restroom upgrade, and a request for a recommendation on excavator vs backhoe for a job coming up in April. Plus six other things I don't remember anymore.
The bucket teeth problem (and my first mistake)
I'd ordered bucket teeth before, but always through a local dealer and always by part number. This time I didn't have the part number. So I did what I always do now: searched esco teeth dealer near me and hoped for the best.
That's where I made the classic beginner error. I assumed esco style bucket teeth and actual ESCO teeth were interchangeable. Spoiler: they are not, and calling a supplier to ask about "ESCO style" when you actually need real ESCO parts will waste a phone call and, if you're not careful, about $700 on return shipping.
Here's what I learned in that phone call, and what I wish someone had told me in 2020: "ESCO style" usually means a compatible aftermarket tooth designed to fit ESCO adapters. It's not the same spec. For a mining or heavy-construction fleet, that distinction matters. Our two excavators run an Ultralok-style adapter system, and a mismatched tooth is a downtime issue, not just a cost issue.
I said "standard size." My supplier heard "whatever fits." We discovered the gap when the first pallet showed up and three of the ten teeth wouldn't seat properly.
That was my communication failure for the quarter. Same words, different meanings — I've been buying long enough to know better. The fix was a 20-minute video call where the supplier's tech guy walked me through measuring the adapter instead of just the tooth. Took less time than the return paperwork, ironically.
The generator installation detour
The temporary site trailer needed power, and I'd budgeted roughly $4,800 for generator installation based on a quote from 2022. That budget was, let's say, optimistic.
What I did not know in February — and what I should have asked up front — is that "installation" means three different things to three different vendors. To one, it meant delivery and setup. To another, it meant electrical hookup and permit filing. To a third, it meant all of that plus the fuel contract and monthly maintenance.
I still kick myself for not building the permit timeline into the original schedule. If I'd asked that one question — "does the install include the electrical permit?" — I could have avoided a two-week delay that pushed the site crew off their original start date. As it happened, we ate the delay and I apologized to the site super more than once.
The lesson isn't dramatic. It's just the boring, consistent one: on any installation, the scope is the thing. Almost every procurement problem I've had in five years comes back to a scope that wasn't defined before the PO went out.
The bidet attachment, which I did not see coming
Facilities wanted a bidet attachment for the second-floor restroom. I assumed this was a five-minute purchase. It was not a five-minute purchase.
The issue was water pressure. Our building is older, and the restroom supply line couldn't hit the minimum PSI that most bidet attachments require for the kind of spray people expect. Nobody wants to be the admin who installed the bidet that doesn't work.
So glad I double-checked the specs before hitting submit. Almost ordered the first one that came up in a search — a $45 model with a pressure requirement our building couldn't meet. Would have been three weeks of "why is the bidet weak" complaints and a second order on my desk.
In the end we went with a model rated for lower inlet pressure, installed by the same contractor doing the restroom lighting, and I only spent about 45 extra minutes on research. (Should mention: I now keep a one-page building spec sheet for recurring facility purchases. That's the kind of thing you build after a near-miss, not before.)
Excavator vs backhoe: the question I got asked twice
By the time I got to the excavator vs backhoe request, I'd already spent most of the week untangling bigger things. I told the ops director honestly: I can pull quotes, but I'm not the right person to tell you which machine fits the April job. That's a fleet decision, not a procurement one.
What I did do was the reading, so I could ask better questions. The short version: excavators dig in a fixed position and are better for deeper, precision work; backhoes move around and are cheaper to run for smaller, mixed jobs. Ops already knew this. The point of my research was so I could ask "what's the depth of the April trench and how much repositioning will the crew do?" — and that question actually changed the direction of the conversation.
That said, I've only been in these fleet conversations for about a year. At least, that's been my experience with our current equipment mix. If your company runs a bigger fleet, the math on excavator vs backhoe probably lives with the equipment manager, not the admin office.
Where I ended up (and the one thing I'd change)
All twelve line items got ordered. Two had to be returned and reordered (teeth and the first bidet model), one pushed the trailer start date by two weeks, and the rest went fine. The bucket teeth, once I ordered the correct ESCO spec, came from a regional dealer who turned out to be excellent — and I found them by searching esco teeth dealer near me and calling the top three results, which is less scientific than it sounds but that's the reality of how this works at a company our size.
The one thing I'd change: I would have built a single intake form for all non-emergency purchases, even weeks in advance. Most of the confusion this month — the tooth spec, the installation scope, the bidet pressure — would have been caught by three fields: exact spec required, deadline, and "will this need a permit?" That form exists now. It took me a Saturday morning to build.
Efficiency, for me, isn't about rushing orders out the door faster. It's about cutting the rework loop. A 20-minute video call upfront beats a 45-minute return process every time. And the difference between my 2020 self and my 2024 self isn't that I've stopped making mistakes. It's that I've stopped making the same ones twice.
